:	Jul 21, 2004

.

Disconnect the battery ground cable.

.

Remove the engine undershield.

.

Remove the intake manifold.

.

Remove the battery.

.

Remove the engine compartment fuse box main feed cable.   Remove the bolt.

.

Remove the engine compartment upper heat shield.   Remove the screw.   Release the 2 mounting clips.

.

Remove the battery compartment side wall.   Release the battery positive cable and grommet.   Release the 4 clips.

.

Release the engine harness from the battery compartment.   Disconnect the 2 electrical connectors.

.

Release the 2 clips on the harness protective cover.

.

Disconnect the fuel injector electrical connectors.   Release the 4 clips.

.

Disconnect the mass air flow (MAF) sensor electrical connector.   Release the clip.

.

Disconnect the engine coolant temperature (ECT) sensor electrical connector.

.

Disconnect the generator connector.

.

Disconnect the knock sensor (KS) electrical connectors.

.

Disconnect the cooling fan control electrical connector.   Release the 2 clips.

.

Disconnect the camshaft position (CMP) sensor electrical conector.   Release the clip.

.

Disconnect the purge control valve (PCV) electrical connector.

.

Disconnect the LH breather electrical connector.

.

Release the wiring harness bridge.   Remove the 2 bolts.

.

Disconnect the LH HO2S and release the clip.

.

Disconnect the RH HO2S and release the clip.

.

Disconnect the crankshaft position (CKP) sensor electrical connector.

.

:   Note the fitted position. Remove the engine wiring harness.

.

:   Align to the position noted on removal. Install the engine wiring harness.

.

Connect the CKP sensor electrical connector.

.

Connect the HO2S electrical connectors.

.

Install the electrical harness bridge.   Tighten the bolts to 45 Nm (33 lb.ft).

.

Connect the breather electrical connector.

.

Connect the PCV electrical connector.

.

Connect the CMP sensor electrical connector.   Secure the clip.

.

Connect the cooling fan electrical connector.   Carefully secure the clips.

.

Connect the KS electrical connectors.

.

Connect the generator.

.

Connect the ECT sensor electrical connector.

.

Connect the MAF sensor electrical connector.   Secure the clip.

.

Connect the fuel injector electrical connectors.   Carefully secure the clips.

.

Connect the engine wiring harness.   Install the clips on the harness protective cover.   Connect and secure the electrical connectors.

.

Install the battery compartment side wall.   Secure the clips.   Install the battery positive cable and grommet.

.

Install the engine compartment upper heat shield.   Secure the clips.   Tighten the screw.

.

Install the fusebox main feed cable.   Install the bolt and tighten to 10 Nm (7 lb.ft).

.

Install the battery.

.

Install the intake manifold.

.

Install the engine undershield.

.

Connect the battery ground cable.